• CRUSHER WIRELESS

  TROUBLESHOOTING PAIRING ISSUES? SOLUTION: Remove your Crusher™ Wireless headphones from your device’s paired list. Turn off Bluetooth mode on your device. Press and hold the "+" and "-" buttons. This will clear the pairing history on your Crusher™ Wireless. A voice prompt will say “Disconnected”, the headphone will go into pairing mode, and a voice prompt will say “Pairing”. If the headphonesFew readers

• DIME 2

  FIRST TIME SET-UP AND PAIRING Take the earbuds out of the case and remove stickers from charging contact points. We recommend you put the earbuds back into the case to charge for about 30 minutes before first use. Be sure the LEDs on the earbuds turn red - this indicates charging. Once charged, remove the earbuds from the case to initiate pairing. Both earbuds will automatically power on and the LEDs will simFew readers

• DIME

  FIRST TIME SET-UP AND PAIRING Take the earbuds out of the case and remove stickers from charging contact points. We recommend you put the earbuds back into the case to charge for about 30 minutes before first use. Be sure the LEDs on the earbuds turn red - this indicates charging. Once charged, remove the earbuds from the case to initiate pairing. Both earbuds will automatically power on and the LEDs will simuFew readers

• GRIND

  INITIAL SET UP & PAIRING HELP: To pair to your device for the first time, remove the stickers covering the charging points on both earbuds, place them into the charging case, make sure both LEDs show red, and leave the lid open. Both buds will then automatically power on and enter Pairing Mode while still in the case. Simply, turn on your device’s Bluetooth and look for GRIND FUEL* in your list of available BluFew readers

• HESH ANC

  TROUBLESHOOTING PAIRING ISSUES?  SOLUTION: A full reset may help. Here’s the simple way to do it. First, remove your headphones from your device’s Bluetooth paired list. Now, press and hold the main button and volume down button for 3 seconds. You’ll see the LEDs flash purple first, a voice prompt will say “Disconnected” and then the headphone will gFew readers

• HESH EVO

  TROUBLESHOOTING PAIRING ISSUES?  SOLUTION: A full reset may help. Here’s the simple way to do it: First, remove your headphones from your device’s Bluetooth paired list. Now, press and hold the main button and volume down button for 3 seconds. You’ll see the LEDs flash purple first, a voice prompt will say “Disconnected” and then the headphonFew readers

• JIB TW 2

  TROUBLESHOOTING PAIRING ISSUES?  SOLUTION: To ensure ease of re-pairing, please unpair or forget your JibFew readers

• JIB+ WIRELESS

  TROUBLESHOOTING EARBUDS NOT CHARGING? Wait momentarily after plugging the earbuds in, occasionally it takes a few seconds to begin charging.  Check to see if any debris is inside or otherwise blocking the charging port  Be sure to charge your earbuds on a flat surface tFew readers

• JIB TW

  PAIRING ISSUES? SOLUTION: To ensure ease of re-pairing, please unpair or forget your Jib™ True in your paired BluFew readers

• MOD

  INITIAL SET UP & PAIRING HELP: QUICK START VERSION: (FIRST TIME PAIRING OUT OF THE BOX) To pair to your device for the first time, remove the stickers covering the charging points on both earbuds, place them into the charging case, make sure both LEDs show red, and then remove both earbuds from the case. A tone will indicate your earbuds have powered on and a voice prompt will say “Ready to Pair” and the earbud LEDs will begin to pulse red/blue. Both buds are now in pairing mode.Few readers

• RIFF 2

  INITIAL SET UP & PAIRING HELP: QUICK START VERSION: (FIRST TIME PAIRING OUT OF THE BOX) To pair to your device for the first time, press the Main Function Button (MFB) for 1 second. The headphone LED will show purple. You’ll first hear the Power ON tone. Then you will hear the voice prompt “Ready to Pair” while the LED on the headphone will begin to pulse red and blue to indicate you are now in Pairing Mode. Turn on your device’s Bluetooth and look for Riff 2 in your list of avaiFew readers

• PUSH ACTIVE

  INITIAL SET UP & PAIRING HELP: To pair to your device for the first time, remove the stickers covering the charging points on both earbuds, place them into the charging case, make sure both LEDs show red, and leave the lid open. Both buds will then automatically power on and enter Pairing Mode while still in the case. Simply, turn on your device’s Bluetooth and look for PUSH ACTIVE in your list of available BFew readers

• SESH ANC

  INITIAL SET UP & PAIRING HELP: To pair to your device for the first time, remove the stickers covering the charging points on both earbuds, place them into the charging case, make sure both LEDs show red, and then remove both earbuds from the case. A tone will indicate your earbuds have powered on and a voice prompt will say “Ready to Pair” as the earbud LEDs will begin to pulse red/blue, both buds are now in pairing mode. OpFew readers

• Charging or Power On Problems

  Charging or Power Issues Troubleshooting steps: Be sure to remove the charging pin protectors found on the charging box. Verify that each earbud is placed in its correct place inside the charging case. Check for any debris blocking the charging pins on the bottom of the case, on the earbud, or on the USB-C plug or port. Check if the removable in-ear gels have not been twisted or falling off. This may prevent the earbuds from fitting properly in the case. If you're having difFew readers